Industrial Machinery & Equipment Inventory

High-power European CNC fiber laser cutting system with dynamic dual-pallet exchange table. Slices mild steel, stainless steel, and aluminum with micron accuracy and zero burr.

• Capacity: Up to 25mm Mild Steel / 20mm Stainless (304/316)
• Accuracy: ±0.05mm positioning & repeatability
• Dual exchange shuttle tables for rapid batch nesting

5-Axis high-pressure abrasive cold waterjet cutting bed. Cold slicing prevents heat-affected zones (HAZ) and edge hardening on sensitive titanium, brass, granite, marble, and glass.

• Zero thermal deformation & metallurgical stress
• Thickness: 100mm+ in stone, tool steels & composites
• 5-Axis dynamic 3D bevel and contour profiling

Heavy-duty hydraulic guillotine shearing machine designed for rapid, high-speed straight-line plate sizing, edge trimming, and sheet squaring prior to bending.

• Rapid sheet cutting up to 16mm plate thickness
• Hydraulic hold-down clamps prevent plate slippage
• Digital motorized backgauge for millimeter accuracy

High-precision multi-axis CNC hydraulic press brake with 300 Ton capacity. Equipped with automated dynamic crowning and multi-point backgauge for complex geometric folds.

• 300 Ton hydraulic force across 4000mm bed length
• Multi-axis CNC crowning ensures uniform bend angle
• Specialized segmented punch & multi-V die tooling

Precision gap-bed center lathe designed for turning industrial drive shafts, imperial/metric screw threading, bush boring, and custom mechanical flange facing.

• Max turning length: Up to 2000mm between centers
• Multi-pitch lead screw for metric/whitworth threading
• High rigidity spindle with rapid travel carriage

Extra-heavy duty long-bed master lathe for large diameter marine propeller shafts, conveyor drive rollers, industrial hydraulic cylinders, and turbine rotor reconditioning.

• 3000mm bed length for heavy industrial shafts
• Large bore spindle for wide pipe pass-through
• Heavy steady rests & follow rests for zero shaft sag

Robust C-frame mechanical power press for continuous progressive stamping, washer blanking, heavy bracket punching, embossing, and deep drawing production.

• High tonnage mechanical crank drive mechanism
• Rapid cycle rate for mass component stamping
• Dual safety control with pneumatic friction clutch

Industrial rotary screw air compressor installation with 500L and 1000L receiver reservoirs and refrigerated dryers, supplying continuous dry pneumatic power across Workshop 2.

• Dual industrial rotary screw drive with PLC controller
• Refrigerated inline moisture dryers for clean dry air
• Powers CNC fiber laser assist gas & pneumatic clamping

Versatile multi-station hydraulic ironworker providing simultaneous punch, angle-cut, flat bar shear, channel notching, and pipe cope stations under one rugged frame.

• 5-in-1 workstations: Punch, shear, notch & bend
• Instant angle iron and I-beam structural clipping
• Heavy hydraulic cylinder with dual-operator footpedals

Heavy industrial 500A GMAW / FCAW solid wire and flux-cored arc welding stations. Used for certified welding of heavy structural frames, base skids, and tanks.

• 500 Amp high duty cycle inverter power source
• Supports solid wire & gas-shielded flux core wires
• AWS D1.1 certified weld procedure compliance

Portable high-pressure Oxy-Acetylene gas cutting and brazing rig for on-site dismantling, heavy steel plate beveling, pipe piercing, and emergency shutdown fitting.

• High-velocity cutting oxygen stream up to 100mm plate
• Integrated flashback arrestors & pressure regulators
• Rapid mobilization for field and emergency shutdowns

Compact high-frequency inverter plasma cutting machine with ergonomic torch for fast manual profiling, gouging, and curved metal trimming across all conductive metals.

• Pilot arc ignition cuts through painted or rusted metals
• Max clean cut up to 30mm thickness on carbon steel
• Rapid air plasma torch with minimal kerf width

Heavy cast-iron column bench and pedestal drilling press for accurate hole drilling, counterboring, countersinking, and mechanical blind hole tapping.

• Multi-step pulley & geared speeds for high torque
• Tilting heavy worktable with T-slots for clamping vices
• Precision depth stop for uniform blind hole drilling

High-power magnetic core drilling machine with massive holding force. Attaches securely to vertical structural steel columns and overhead I-beams for on-site broaching.

• 15,000 N magnetic holding adhesion force
• Annular broach cutters from 12mm to 50mm diameter
• Integrated internal automatic coolant lubrication feed

Precision 3-roll mechanical plate bending machine for forming seamless cylindrical shells, cones, curved ductwork, and food-grade stainless tank bodies.

• 3-Roll pyramid configuration with pre-bending capability
• Produces uniform cylinders, cones & heavy pipe segments
• Rolls stainless steel 304/316 and carbon steel plates

Heavy-duty 630-Amp Shielded Metal Arc Welding (SMAW / Stick) inverter plant. Delivers deep penetration welds on heavy structural columns and thick pipe root passes.

• 630 Amp high duty cycle for continuous 5.0mm rods
• Hot start and arc force control prevent electrode sticking
• Handles low-hydrogen 7018 & cellulosic 6010 electrodes

Advanced AC/DC Pulse GTAW (Argon TIG) welding station with high-frequency arc start. Essential for sanitary food-grade stainless steel tanks and aluminum fabrications.

• Precision AC/DC pulse for thin sheet metal and thick alloy
• Pure 99.99% Argon shielding gas for oxide-free weld bead
• ASME Section IX qualified for sanitary & pressure vessels